Home / All Calculators / Roof Replacement Cost Calculator

Roof Replacement Cost Calculator

A full roof replacement in the US costs $8,500 to $18,500 in 2026 for a typical 1,800 sq ft home, or $4.50 to $9.50 per sq ft installed. Asphalt shingles are $5 to $8 per sq ft, metal roofing $9 to $16 per sq ft. Use the calculator to get your cost by roof size, pitch, material, layers to tear off, and your state labor rate.

How this calculator works

Roofs are bigger than the floor plan below them. The calculator estimates your roof area from your house footprint, adjusted for how steep the roof is, then multiplies by a typical installed price per square foot for your material. It adds optional tear-off of the old roof and a labor adjustment for taller homes.

Typical roof replacement cost by house size and material

One-story home with a moderate roof pitch, including tear-off, in an average-cost area.

House footprintRoof area (est.)3-tab shinglesArchitectural shinglesMetalTile
1,000 sq ft1,250 sq ft$7,500$9,380$16,900$19,400
1,500 sq ft1,875 sq ft$11,250$14,050$25,300$29,050
2,000 sq ft2,500 sq ft$15,000$18,750$33,750$38,750
2,500 sq ft3,125 sq ft$18,750$23,450$42,200$48,450

What affects the cost

  • Roof size and pitch. Steeper roofs have more surface area and are harder and slower to work on, which raises labor costs.
  • Material. Asphalt shingles are the most common and affordable. Metal and tile cost much more up front but last longer.
  • Tear-off and disposal. Removing one or more old layers and hauling them away is a standard cost.
  • Complexity. Valleys, dormers, skylights and chimneys add flashing work and time.
  • Decking repairs. Rotted or damaged roof decking found during tear-off is repaired at extra cost.
  • Home height and access. Taller homes and hard-to-reach roofs need more safety gear and labor.

Tips

  • Get at least three quotes, and check each contractor's license, insurance and references.
  • Ask for a written scope that lists tear-off, underlayment, flashing, ventilation and cleanup.
  • Check the manufacturer warranty and the contractor workmanship warranty separately.
  • Ask your insurer whether storm damage might be covered before paying out of pocket.
  • Schedule in dry weather when possible. Roofers are often busiest after storm season.

Frequently asked questions

How much does a new roof cost?

It varies widely with size, pitch and material. Asphalt shingles cost the least and metal or tile the most. The calculator gives a range based on your inputs.

What is a roofing square?

A roofing square is 100 square feet of roof area. Contractors often quote prices per square.

How long does a roof last?

Asphalt shingles commonly last around 20 to 30 years, metal often 40 years or more, and tile can last even longer, depending on climate and installation quality.

Does this include gutters or skylights?

No. Gutters, skylights, chimney work, solar panels and structural repairs are extra.

Can I lay new shingles over old ones?

Some areas allow one overlay, but tearing off the old layer lets you inspect and repair the deck. Check your local code and ask your roofer.

More calculators

Results are planning estimates based on typical U.S. ranges and the numbers you enter. They are not quotes or professional advice. Last reviewed October 2026.

Roof replacement cost per sq ft by material (2026)

MaterialMaterials onlyInstalledLifespan
Asphalt 3-tab$2.50 - $4 / sq ft$5 - $7 / sq ft15-20 years
Architectural shingles$3.50 - $5.50 / sq ft$6.50 - $9.50 / sq ft25-30 years
Standing seam metal$6 - $10 / sq ft$9 - $16 / sq ft40-70 years
Clay / concrete tile$8 - $14 / sq ft$13 - $22 / sq ft50+ years

Example: 1,800 sq ft roof, architectural shingles at $7.50/sq ft + 1 layer tear-off $1.20/sq ft + ridge vent $650 = $16,310 total. Steep pitch over 8/12 adds 15-25% in labor.

Roof replacement FAQs

How much to replace a 2,000 sq ft roof?

With architectural shingles, expect $14,000 to $19,500 including tear-off. Metal for the same roof is $21,000 to $32,000.

Does pitch affect price?

Yes. A 12/12 pitch can cost 30% more than a 4/12 because of safety, slower work, and more waste.

Should I tear off or overlay?

Overlay saves $1-$2 per sq ft but hides rot and adds weight. Most roofers recommend tear-off if you already have 2 layers.