Home / All Calculators / Fence Cost Calculator
Fence Cost Calculator
A wood privacy fence in the US costs $28 to $52 per linear foot installed in 2026, with most 150-foot projects landing between $4,200 and $7,800. Vinyl runs $35 to $65 per foot, chain-link $15 to $28 per foot. Use the calculator below to get your exact cost by material, height, gates, and whether you remove an old fence.
How this calculator works
The calculator multiplies your fence length by a typical installed price per linear foot for the material you choose. It then adjusts for height and your local price level, and adds gates and optional removal of an old fence. Prices include materials and labor.
Typical fence installation cost by length and material
Typical installed prices for a 6 ft fence in an average-cost area, with no gates and no old fence removal.
| Length | Wood privacy | Vinyl privacy | Chain link | Aluminum | Split rail |
|---|---|---|---|---|---|
| 100 ft | $2,500 | $3,500 | $1,300 | $3,000 | $1,500 |
| 150 ft | $3,750 | $5,250 | $1,950 | $4,500 | $2,250 |
| 200 ft | $5,000 | $7,000 | $2,600 | $6,000 | $3,000 |
| 300 ft | $7,500 | $10,500 | $3,900 | $9,000 | $4,500 |
What affects the cost
- Material. Chain link is usually the cheapest per foot and vinyl or aluminum the most expensive of the common options. Wood sits in the middle and needs more upkeep.
- Height. Taller fences use more material and take more labor. A 6 ft privacy fence costs noticeably more per foot than a 4 ft one.
- Gates. Each gate adds hardware and framing. A walk gate is cheaper than a wide driveway gate, and automatic gates cost far more.
- Terrain and soil. Slopes, rocky soil, tree roots and tight access slow down post-hole digging and raise labor costs.
- Old fence removal. Tearing out and hauling away an existing fence is usually billed separately, per foot or as a flat fee.
- Permits and HOA rules. Many areas require a permit or limit fence height and style. Check before you order materials.
Tips
- Get three written quotes that list the same material, height, post size and number of gates.
- Confirm your property line before building. A survey is cheaper than moving a fence later.
- Ask who handles permits, utility marking and disposal of old materials.
- If you are handy, a chain link or wood fence is the most realistic DIY project, since labor is a large part of a professional install.
- Seal or stain wood within a few months of installation to extend its life.
Frequently asked questions
How much does a fence cost per linear foot?
Most residential fences land somewhere between about $8 and $45 per linear foot installed, depending on the material, height and your area. Chain link is at the low end and vinyl or aluminum at the high end.
What is the cheapest type of fence?
Chain link is generally the cheapest to buy and install. Split rail is also inexpensive but gives no privacy and does not contain small pets.
Is a wood or vinyl fence cheaper?
Wood usually costs less up front. Vinyl costs more but needs little maintenance, so the gap narrows over many years.
Does the calculator include permits?
No. Permit fees and surveys vary by city and are not included, so ask your local building department.
Why is my contractor quote higher than the estimate?
Terrain, access, material grade, minimum job charges and local demand can all push a quote above a typical range. Ask for an itemized breakdown to see where the difference comes from.
More calculators
Concrete Slab Cost Calculator
Calculate cubic yards and bags of concrete, and the installed cost of a slab.
Home & GardenDeck Cost Calculator
Estimate deck cost by size and material: wood, composite or PVC.
Home & GardenRoof Replacement Cost Calculator
Estimate the cost of a new roof by house size, pitch and material.
Home & GardenFlooring Installation Cost Calculator
Calculate flooring cost and how many square feet to order, for any floor type.
Results are planning estimates based on typical U.S. ranges and the numbers you enter. They are not quotes or professional advice. Last reviewed October 2026.
Fence cost per linear foot by material (2026)
| Material | Materials only | Installed | Best for |
|---|---|---|---|
| Chain-link 4ft | $8 - $14 / ft | $15 - $28 / ft | Budget, pets, large lots |
| Wood privacy 6ft | $16 - $30 / ft | $28 - $52 / ft | Privacy, classic look |
| Vinyl privacy 6ft | $22 - $38 / ft | $35 - $65 / ft | Low maintenance |
| Aluminum ornamental | $28 - $45 / ft | $45 - $75 / ft | Front yard, HOA |
Example: 150 ft wood privacy 6ft at $38/ft installed + 1 gate $350 + old fence removal $450 = $6,500 total. Gates add $250-$600 each, posts on slopes add 10-15%.
Fence cost FAQs
How much does a 200-foot fence cost?
200 ft of wood privacy at $38/ft = $7,600 + gate. Same length in chain-link is about $4,200 installed.
Does fence height change price a lot?
Yes. Going from 4ft to 6ft adds 25-40% because of longer posts, more pickets, and wind load.
Is it cheaper to install it myself?
DIY saves $12-$22 per foot in labor, but you still need post-hole digger, concrete, and 2 people for 2-3 days for 150 ft.